Halo recessed lighting is one of the most popular forms of recessed lighting is available today. The installation requires a combination of preparation and the right equipment, but I'm pretty easy to install, once appropriate measures are taken.
However, first you need to plan the lighting. From the recessed lighting is so inflexible, you should make sure that you get this right the first time. In what areas do you want to shine, that: There are three things to notePosition of the ceiling beams and the position of the ceiling beams. Imagine where you want to set the light. If they have in the kitchen, for example, make sure you have all the counters you want on.
Next you need to verify the presence of the ceiling beams. Recessed lighting can not easily be placed there. Finally, you must ensure that arranged evenly around the beam of light. You can do this in two ways. Change the distance between the lightsMove them closer together or farther away, or turn the lights so that they do not have jets.
Next, you should use a saw in those places where you want the lights to be used. Special saws are made for this purpose and I recommend you rent or buy one of these saws. They are usually adjustable so that you have the correct width. Check the description to cut your halo on the proper flow of holes.
Note that to install something in aCeiling creates a lot of dust. Be sure to remove all furniture from the room before you actually begin to cut, or at least cover carefully, it can not be moved.
Before you put your headlights, you must install the wiring for lighting. To do something with electricity, I suggest you consult with an electrician before and definitely make sure that the power supply to the room and all rooms prior to departure. The wires can be relatively easy to Strung OutHole to hole. If you get in trouble for the next hole, use a L-shaped for the wiring from one hole to another string.
Now you are ready, the lights in the holes instead. Fortunately, the lighting alone cuts fairly easy to install. Various screens are different means to stick to the ceiling, but are usually held by the same ceiling is not through the woods above.
Congratulations, you now have built-in lighting alone. It 's timeYou enjoy your place and the new lighting.
0 comments:
Post a Comment