Recessed lighting is an excellent addition to any room. Recessed lighting is available in different styles for different applications. There may be down lighting, which are used to highlight certain areas or places is in a room and there are also directional recessed lighting, which are used to illuminate walls or decorative items.
Before beginning the installation of recessed lighting, here are some safety tips to keep in mind when working withElectricity.
1 Turn the power switch of the circuit before begging installation.
2 Use a tester wire to secure the power is actually turned off before continuing.
3 Always check with local authorities to determine if a permit to commemorate the work, you must do.
4 There is always a good idea, your latest work is checked by an auditor.
The first step in the installation of recessed lighting is to create a projectPlan. Once the plane, and you know you want that kind of recessed lighting is used, only the height of the lights and buy from your local retailer or online.
Check with your design plan for the position of each light manufacturer and model that comes with the light of the drawl cut in the ceiling. Cut a quarter-inch hole in the center of the circle and check for any kind of obstacle in the ceiling before continuing. If everything is clear with aDrywall cutter cut the hole for the light.
Again, it is important to ensure that the power is turned off before starting the thread of light.
When you are sure that the power source is turned off, pull the wire into the room where the unit EBL installed about 18 to 20-inch wire will work.
Wire the first light and tie in the wiring that will lead to the next traffic light, which must be installed.
Secure all connections with wire nuts andContinuation of the process is connected to the last light. Once all the lights were installed, the next step for the cover plate, install the maximum aperture of the cover downlight.
Install the bulbs and re-energize the circuit to the fuse box.
Recessed lights are easy to install and require virtually no maintenance. Add a dimmer to the wall is the ability to add lights to create exactly the right atmosphere in any room.
0 comments:
Post a Comment